Nashville Telecaster 5-Way Wiring Kit (Neck + Bridge) | WD Music / CTS Custom Taper Potentiometers, Mallory 150 Capacitor

Important - Please leave message in the "Special Instructions For Seller" box at time of checkout for "reversed" layout - any other customizations please reach out prior to purchase to verify availability.  Thanks so much! 

Here's a super easy kit to upgrade your Telecaster or T-style guitar with top quality components for your Nashville Style 3-Pickup Telecaster.  Potentiometer spacing is 2-1/2" (Center-to-Center) and aligns with Fender Part No. 0992058000 and Kluson Telecaster Control Plates.

Pickup switching is as follows:

• Neck
• Neck + Middle
• Neck + Bridge
• Middle + Bridge
• Bridge

Comes completely wired and ready to install.  Simply connect your pickup hot leads and grounds.

• WD Music / CTS Custom Audio Taper 275 kΩ Solid Shaft Potentiometers
• Oak Grigsby 5-Position Single Wafer Super Switch (2-Pole 5-Throw)
  
• Mallory 150 .022 µF, .047 µF, or .1 µF Capacitor  - .047 µF is Most Common w/ Single Coil Pickups
• Optional .001 µF Ceramic Disc / 150 kΩ Metal Film Resistor Treble Bleed
• Switchcraft #11 Mono Output Jack
• Gavitt Vintage Style Cloth Pushback Wire

Each kit is assembled and soldered with extreme care and concern for ease of installation and many years of trouble free use.